² CHASSIS: CSC5170GXFAP40/AT CAFS (Compressed Air Foam System) Major Fire Truck mounted base on the ISUZU fire vehicle chassis, 5 nos. (include driver) of crew cab. The fire truck featured with its comfortable and reliable to drive. The 4× 2 driving mode with a maximum driving speed 105km/h. ISUZU make vehicle engine model 6HK1-TCH, output power 221kW, and it meets the national V emission standard.
² TANKER: Built-in water tank and foam tank, Water Tank Volume 4000kg, A-Type Foam Volume 200kg, B-Type Foam Volume 200kg, and the Tank Body is made of PP-C composite material.
² FIRE PUMP: The fire truck takes power from the chassis transmission and drives the CB10/60 fire pump installed in the rear pump room of the fire truck through a universal coupling drive shaft. The fire pump has a rated outlet capacity of 3600LPM at pressure of 1.0MPa.
² FIRE MONITOR: The fire truck roof is installed with Zhangqiu(brand) PL48-64YZ (model) Water, Foam double-purpose wireless remote-control fire monitor, rated flow capacity 2880LPM at maximum pressure 1.2MPa, with a performance of shooting range at 60m distance, 340° rotation.
² CAFS: The fire truck is equipped with a DC-CAFS60/45M (model) compressed air foam firefighting system with strong water mist /frog fire depression function.
² PROPORTIONER: Shanghai Rongshen(brand) PH64(model) manual foam ratio mixer, the mixing ratio of foam liquid is 3%-6%; it can realize water and Class A at the same time, Class B foam jet extinguishing.
² APPLICATION: The fire truck could work on extinguishing Class A and Class B fires, and also could be carry out independently for comprehensive rescue and rescue works such as detection, demolition, life-saving, lighting, and protection. It has high specific power, more crew carrying, strong all-round performance, and centralized control.
² CONSTRUCTION: The main metal frame of the fire truck is constructed from high-quality 20# section steel weldment structure to ensure that the overall frame structure is high in strength, solid and reliable. The internal equipment and accessories compartments, frames are all made of high-strength aluminum alloy profiles to, and the skirt adopts an outturned pedal door. The structure makes it easy to step and get the equipment. The surface uses anodized aluminum alloy sheet with small patterns to cover the surface, corner aluminum edging and other processes to ensure the performance of the equipment box in good looking appearance and light duty.
² CERTIFICATIONS: The fire-fighting performance meets the requirements of GB7956; the chassis has passed the China Compulsory Product Certification (CCC); the engine emissions meet the European IV standard.
CONCLUSION: According to the actual firefighting requires, and operation procedures, the fire truck with a humanized design, anti-corrosion processing, anti-vibration, anti-falling, anti-scratch, anti- rotation, push-pull or pull-out special fixtures to fix all vehicle-mounted equipment, equipment layout is reasonable, compact. The clamping is solid and fixed, the markings are eye-catching, and any equipment can be used in the two actions, which can realize nearby pick-and-put, multi-person operation without interference.
Full pay loading
Water 4000kg, Type-A foam 200kg, Type-B foam 200kg
Max. driving speed
Emission class level
Fire pump capacity
Fire monitor capacity
Fire monitor reach
Water ≥60m, Type-B foam ≥55m, Type-A foam ≥45m
Emission glass level
FAST 9 speed
Min turning radius
Max. driving speed
Model YTQ590K, ratio 1.43, full power output, air type, flange, the rotation is the same as the engine.
Exhausted brake, 11.00R20 Tire
Fire Package Specifications
Integral frame body, symmetrical on both sides. The two sides of the front and middle of the body are equipment compartments, the middle is a built-in independent water and liquid tanker, and the rear of the body is a pump room.
Aluminum alloy rolling doors are installed on both sides of the compartments and the rear of the pump room; a catwalk ladder is installed on the right rear side of the fire truck.
The main frame adopts high-quality steel frame structure, adopts carbon dioxide protection welding to complete the overall skeleton structure, and the outer decorative board, inner sealing board and floor adopt anodized flat aluminum plate.
The shutter doors on both sides and the rear of the pump room are made of aluminum alloy with a lock structure, which has good sealing and dustproof functions.
The lower skirt of the rolling door is equipped with an outward-turning steel frame. The opening and closing of the pedal are double-fixed by a double tension spring hinge limit device. The aluminum alloy pattern cover structure pedal door has reliable safety performance.
1) Water tank
Built-in tank body, all-metal welded structure, with horizontal and vertical anti-wave plates inside, with manholes in the baffles, meet China Tanker product standards. The front and rear ends cover and anti-wave plate are equipped with trapezoidal folding ribs that can increase the strength, and the complete tank processed with anti-corrosion treatment.
The tank body is connected to the frame with an integral subframe, and shock absorption pad equipped.
The water tank is welded by PP-C composite material, welded by 3-5mm steel plate material (including tank connection pipe), bottom plate thickness 5mm, side plate thickness 4mm, top plate 3mm, anti-corrosion treatment, durable.
4000 kg for water loading
1 no. of DN470mm manhole, quick lockable/openable.
1 no. of water suction port in the rear of the pump room
1 no. of overflow valve device
1 no. of drain outlet with ball valve.
Water injection port: DN80, connected to 2 no. DN 80 cassette male ports, separately set on both sides of the body.
Water injection pipe structure with an elbow style.
1 no. of water outlet gate, pneumatically controlled.
2) Type-A and B Foam Tank
Conjoined with water tank
Loading 200 kg of Type- A foam, loading 200kg of Type-B foam
It is welded with PP-C composite material, the bottom plate thickness is 5mm, the side plate thickness is 4mm, and the top plate is 3mm.
Type -A and Type- B foam compartment each set 1 no. of DN470 manhole with lockable/openable, auto pressure release device.
1 no. of DN40 port with ball valve in Type-B foam tank for outlet remaining liquid.
² FIRE CONTROLS
The control system composed of 1) Fire pump, 2) DC-CAFS60/45M vehicle-mounted automatic compressed air foam system, 3) Round-the-pump style foam proportioner foam proportional mixing system, automatic pressure balance device at the outlet, fire monitor, medium pressure hose reel, water gun, pipeline system, etc.
1) Fire Pump
Ordinary pressure centrifugal pumps
Flow capacity @ pressure
Max. water suction depth
Vacuum pump diversion
Water leading time
Compressed Air Foam System（CAFS）
& reference photo
It consists of a water pump, air compressor, type A foam injection mixing system, type A foam control system, and a strong water mist fire extinguishing system.
Strong wet foam
Strong water mist
Fire Monitor Outlet
Super wet foam
- Air Compressor
Screw rotary type
Forced water cooled
Oil bath type
- Type-A Foam Injection Mixing System
Foam pump model
Automatically match the system, 0.85MPa approximately
0.1%-3.0%, step-less control
- Type-A Foam Control System
Display & Control
Touch LCD display and parameter setting
Mechanical button operation
3) Round-the-pump Style Type-B Foam Proportioner
4) Fire Package Control Dashboard
Intelligent control; the buttons are all provided with Chinese signs; there are pipeline layout diagrams and instructions for operation and maintenance.
The instrument panel is located above the water pump in the pump room, equipped with tachometer, vacuum gauge, water pressure gauge, level gauge and other instruments.
5) Fire Monitor
PL48-64YZ water foam dual use purpose
PL48-64YZ Water and foam dual purpose fire monitor
Water: ≥60m A type foam ≥45m
B type foam≥55m
6) Pipe Line System
Water suction pipeline
There is an internal button type DN150 suction port at the rear of the pump room.
Water injection pipeline
One DN80 side water injection port is set on both sides of the pump room, and one DN80 upper water filling port is set in the pump room.
Water outlet pipeline
Each side of the pump room is provided with a DN80 caliber cassette interface, a type A foam outlet, and a fine water mist outlet.
Cooler water pipeline
Equipped with cooling pipeline and control valve, cooling power take-off.