info@csctrucks.com +86 136 4729 8000

Spraying Water Firefighter Truck 4000 Liters

●DONGFENG 4x2 Truck Chassis
●4000 L Water Tank Capacity
●Shanghai CB10/30 Fire Pump
●PS30 Fire Monitor Range ≥55M
●Shipping Size 6.84x2.19x3.01m

Features

1. General layout

 

The vehicle is composed of two parts: the firefighter's cabin and the body. The body layout adopts an integral frame structure, with a built-in water tank, equipment boxes on both sides, a water pump room at the rear, and the tank body is a parallel cuboid box tank.

 

2. Equipment compartment and pump cabinet

 

Structure

The main frame structure is welded with high-quality square pipes, and the outer decorative panel is welded with carbon steel plates, and the roof is non-slip and walkable. (Aluminum alloy square tube welding can be used according to user requirements)

 

Equipment Compartment

The equipment compartment is located at the rear of the crew cab, with aluminum alloy rolling shutters on both sides and lighting lights inside. There are storage boxes in the equipment compartment according to requirements.

 

Pump Cabinet

The pump cabinet is located at the rear of the fire vehicle. There are aluminum alloy rolling doors on both sides and back, and there are lights inside. Some common equipment can be placed on both sides of the pump room.

 

3. Ladder and car handle

The rear ladder is made of aluminum alloy two-section flip ladder. When used, it should not exceed 350mm from the ground. The handle of the car adopts a grooved non-slip round steel pipe with a plastic spray treatment on the surface.

 

4. Tank Capacity 4000kg

 

The material is high-quality carbon steel, the thickness is 3mm (can be made of stainless steel, PP according to user requirements).

The tank body is fixed and the chassis frame is elastically connected.

Manhole in the tank: 1 DN460 manhole with quick lock/open device.

Overflow port: set 1 DN65 overflow port.

Remaining water outlet: 1 nos DN40 water tank to discharge the remaining water outlet, equipped with a ball valve.

Water injection port: connect 1 DN65 port on the left and right sides of the water tank.

Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN100 valve, which can be controlled pneumatically and manually, set 1 water pump to the water tank filling pipe, DN50 valve, can be controlled pneumatically or manually.

 

5. Water pump

Model CB10/30-XZ low pressure vehicle fire pump

Atmospheric centrifugal

Rated flow 30L/s @1.0MPa

Rated outlet pressure 1.0MPa

Maximum suction depth 7m

The water diversion device comes with a sliding vane pump

Water diversion time at maximum depth of absorption ≤35s

 

6. Piping system

Pipe material with quality seamless steel pipe;

DN100 suction port on the rear side of the pump room of the suction pipeline;

DN65 water injection port on the left and right sides of the water tank, and a DN65 is installed in the pump room, and the water pump injects water into the tank.

DN80 water outlets on the left and right sides of the pump room of the outlet pipeline, with a stop valve and a cover

Cooling water pipeline is equipped with cooling water pipeline and control valve for cooling power take-off...

 

7. Fire Monitor

Model PS30W

Manufacturer Chengdu West Fire Machinery Co., Ltd.

Rotation angle 360° horizontal rotation

Maximum elevation/depression angle Depression angle≤-15°, elevation angle≥+45°

Flow 30L/S

Range ≥55m

 

8. Fire Control System

The control panel mainly includes two parts: the cab control and the pump cabinet control. The cab controls the pump off gear, warning lights, lighting and signal device control, etc.; the pump room controls the main power switch, parameter display, and status display.

Electrical Equipment

Additional electrical equipment independent circuit

Auxiliary lighting firefighter room, water pump room and equipment box are equipped with lights, and the control panel is equipped with lights, indicator lights, etc.

Red and blue strobe lights are installed on both sides of the body

 

9. Warning device

Long row of all red warning lights, installed on the top of the cab

Siren, its control box is below the driver's front

Install a 35W fire searchlight at the rear of the fire site lighting

 

10. Equipment

 

According to the firefighting needs, operation procedures, tools equipped with easy pick and place nearby.

Use special fixtures that prevent rust, vibration, fall off, and scratches.

The mark is eye-catching, multi-person operation, non-interference.

Description

Overview

Dongfeng Spraying Water Firefighter Truck 4000 Liters refitted from Dongfeng DOLLICAR model number EQ1090SJ8BDC chassis, . The vehicle with chassis manufacturers original firefighter's passenger crew cabin number 2+3 people. Fire truck work as chassis engine transmission transmits the power to the fire pump through the drive shaft. The fire pump sprays the water in the tank through the fire monitor.

Main components include sandwich type PTO, transmission mechanism, fire pump, fire monitor, tank , water pipeline, equipment compartment and fire-fighting equipment, electrical control system, etc.

 

The truck has an inner tank structure. The front part of the body is a water tank + equipment box, and the rear part is a pump. room. The liquid-carrying tank body is made of high-quality carbon steel, which is elastically connected to the chassis. It carries 2600kg of water. It is equipped with a CB10/30-XZ fire pump produced by Shanghai Xiongzhen Fire Fighting Equipment Co., Ltd., with a rated flow of 30L/S. The roof is installed with Chengdu Weiss PS30W vehicle fire monitor produced by Special Fire Machinery Co., Ltd. The biggest feature of this car is its flexibility, good handling and easy maintenance. It can be widely used in public security fire brigades, factories and mines, communities, docks and other places to fight general material fires.

 

The fire-fighting performance of the vehicle meets the requirements of GB7956-2014; the chassis has passed the national compulsory product certification; the engine emissions meet the requirements of the fifth stage limit of GB17691-2005 (National V standard); the vehicle has passed the inspection of the National Fire Equipment Quality Supervision and Inspection Center (Report No.: Zb201630546) and has been included in the new automobile product announcement of the Ministry of Industry and Information Technology, and CCCF is in the process of applying.

 

Structure-The main frame structure is welded with high-quality square pipes, and the outer decorative panel is welded with carbon steel plates. The roof is non-slip and walkable, with flip pedals on both sides and non-slip design.

 

Equipment compartment-The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling doors on both sides, and lighting lights inside. There are storage boxes in the equipment compartment according to requirements.

 

Pump compartment-the pump cabinet is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and back, and lighting lamps inside. Some common equipment can be placed on both sides of the pump room.

 

Brief

DONGFENG 4x2 Truck Chassis

4000Liters Water Tank Capacity

Shanghai CB10/30 Fire Pump

PS30 Fire Monitor Range ≥55M

Shipping Size 6.84x2.19x3.01 m


ITEM

DETAILS

Chassis

Model Line

DOLLICAR L

Manufacture

Dongfeng

Engine Model

B140

Engine Horse Power

140hp

Wheelbase

3800 mm

Overall Size

6840×2190×3010 mm

Total Tank Volume

4000 Liters

Water Tank Capacity

4000 Liters

Foam Tank Capacity


Water Pump

CB10/30-XZ

Pump Capacity

1800LPM @ 1Mpa

Fire Monitor

PS30W

Fire Monitor Range

≥55m

PTO

Sandwich type

Hose Reel

30 m length medium pressure hose reel with nozzle

Control Panel

English language control panel

Alarm Lights

Rear fitted with 2 nos. of alarm lights

Features

1. General layout

 

The vehicle is composed of two parts: the firefighter's cabin and the body. The body layout adopts an integral frame structure, with a built-in water tank, equipment boxes on both sides, a water pump room at the rear, and the tank body is a parallel cuboid box tank.

 

2. Equipment compartment and pump cabinet

 

Structure

The main frame structure is welded with high-quality square pipes, and the outer decorative panel is welded with carbon steel plates, and the roof is non-slip and walkable. (Aluminum alloy square tube welding can be used according to user requirements)

 

Equipment Compartment

The equipment compartment is located at the rear of the crew cab, with aluminum alloy rolling shutters on both sides and lighting lights inside. There are storage boxes in the equipment compartment according to requirements.

 

Pump Cabinet

The pump cabinet is located at the rear of the fire vehicle. There are aluminum alloy rolling doors on both sides and back, and there are lights inside. Some common equipment can be placed on both sides of the pump room.

 

3. Ladder and car handle

The rear ladder is made of aluminum alloy two-section flip ladder. When used, it should not exceed 350mm from the ground. The handle of the car adopts a grooved non-slip round steel pipe with a plastic spray treatment on the surface.

 

4. Tank Capacity 4000kg

 

The material is high-quality carbon steel, the thickness is 3mm (can be made of stainless steel, PP according to user requirements).

The tank body is fixed and the chassis frame is elastically connected.

Manhole in the tank: 1 DN460 manhole with quick lock/open device.

Overflow port: set 1 DN65 overflow port.

Remaining water outlet: 1 nos DN40 water tank to discharge the remaining water outlet, equipped with a ball valve.

Water injection port: connect 1 DN65 port on the left and right sides of the water tank.

Water inlet and outlet: set 1 water tank to the water pump inlet pipe, DN100 valve, which can be controlled pneumatically and manually, set 1 water pump to the water tank filling pipe, DN50 valve, can be controlled pneumatically or manually.

 

5. Water pump

Model CB10/30-XZ low pressure vehicle fire pump

Atmospheric centrifugal

Rated flow 30L/s @1.0MPa

Rated outlet pressure 1.0MPa

Maximum suction depth 7m

The water diversion device comes with a sliding vane pump

Water diversion time at maximum depth of absorption ≤35s

 

6. Piping system

Pipe material with quality seamless steel pipe;

DN100 suction port on the rear side of the pump room of the suction pipeline;

DN65 water injection port on the left and right sides of the water tank, and a DN65 is installed in the pump room, and the water pump injects water into the tank.

DN80 water outlets on the left and right sides of the pump room of the outlet pipeline, with a stop valve and a cover

Cooling water pipeline is equipped with cooling water pipeline and control valve for cooling power take-off...

 

7. Fire Monitor

Model PS30W

Manufacturer Chengdu West Fire Machinery Co., Ltd.

Rotation angle 360° horizontal rotation

Maximum elevation/depression angle Depression angle≤-15°, elevation angle≥+45°

Flow 30L/S

Range ≥55m

 

8. Fire Control System

The control panel mainly includes two parts: the cab control and the pump cabinet control. The cab controls the pump off gear, warning lights, lighting and signal device control, etc.; the pump room controls the main power switch, parameter display, and status display.

Electrical Equipment

Additional electrical equipment independent circuit

Auxiliary lighting firefighter room, water pump room and equipment box are equipped with lights, and the control panel is equipped with lights, indicator lights, etc.

Red and blue strobe lights are installed on both sides of the body

 

9. Warning device

Long row of all red warning lights, installed on the top of the cab

Siren, its control box is below the driver's front

Install a 35W fire searchlight at the rear of the fire site lighting

 

10. Equipment

 

According to the firefighting needs, operation procedures, tools equipped with easy pick and place nearby.

Use special fixtures that prevent rust, vibration, fall off, and scratches.

The mark is eye-catching, multi-person operation, non-interference.

Hot Tags: spraying water firefighter truck 4000 liters, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance

Send Inquiry