info@csctrucks.com +86 136 4729 8000

HOWO Garbage Compactor

•Container Size 6+1CBM
•HOWO 4x2 Truck Chassis
•Size6.59x2.05x2.64m
•Tare Weight 4.58T
•120hp Diesel Engine
•Euro 3 Emission Class

STRUCTURES

image

1.       TRUCK CHASSIS

2.       GARBAGE CONTAINER( BOX)

3.       EJECTOR

4.       HOPPER

5.       LIFTING SYSTEM

6.       COMPACTING

7.       SHOVEL

8.       BIN LIFTER

9.       HYDRAULIC SYSTEM

GARBAGE CONTAINER(BOX)

image

● Garbage container work piece to be processed with plasma cutting machine from high strength steel and fabricated by submerged-arc welding machine. Container bottom floor shaped with concave plane, side and top wall designed with elliptical format.

● Container featured with nice appearance, light weight, even stress. The garbage inside the container is completely closed when compaction and transportation.

BIN LIFTER

image

● Multi operation and choice.

● The bin lifter could operate with plastic single or double bin of 02 wheels’ capacity of 240l and also operate with 04wheels 1100l bins.

● Rear truck and middle of truck both designed a control panel easy operation.

COLLECTING & COMPACTING


image

● Compactor consisted with ejector panel scrapper etc.

● By means of ejectors’ up-down move and scrapper’s revolve push the garbage from hopper into garbage containers.

● Combined movement parts which fabricated from high quality beam slab or built as a box-structure, very solid construction, light duty.

COMPACTOR HYDRAULIC

image● The compactor lifting mechanism designed two double acting safety circuit hydraulic cylinders.

● Set a one way balance valve which cut-off the direct connection between lift cylinder and hydraulic pipe in the lifting cylinder, even if the hose burst, the uplifted tailgate will not drop suddenly case accident, safety props.

CONTROLS


image

1.Oil Tank                                        2.FIlters

3.PTO                                               4.Oil Pump

5.Manual Valve                              6.Discharge Cylinders

7.Pressure Gauge                          8.Tailgate Cylinder

9.Combined Valve                       10.Oil Hose

11.Slide Cylinder                         12.Ejector Cylinder

13.Shovel Cylinder

CRITICAL PARTS

Ejector

Tailgate

Conveyor Plat

Shovel System

image image image image

APPLICATION

Bin Unloading Rear Dustpan Works Skip Load Container
image image image
Scrapping Garbage Ejecter Discharge Works Tailgate Unloading Work
image image image

FABRICATING IN WORKSHOP

image

● Garbage container mounted works

● Install hydraulic system

● Hydraulic test

● Water leakage test

● Pre painting works

● Cylinder install works

● Shovel plate install

● Ejector install

● Tailgate install

● Safety lock test

PICK UP A CHASSIS

image

DRAWING

image

Description

HOWO Garbage Compactor 6+1mStandard

FEATURES

● Garbage container volume capacity 6cbm compacted waste.

● Rear hopper capacity volume 1cbm with self cleaning ability.

● Ellipse format without amendments.

● Adopted Japanese technology, high strengthen U type one-piece construction beam as sliding rails with high stress ability, Non-deformability.

● Designed with guide type sewage collection device that could guide the sewage, which leakage by means of gasket failure between tailgate and container body, drainage into the sewage tank, effectively prevent the re-pollution from leakage.

● Designed a sealing cover which is pneumatic controlled in the tailgate opening position, so that the container could be completely closed, easy operation and prevent the stink and sewage come out.

● Tailgate and container combined part with hydraulic locks.

● Tailgate telescopic cylinder with self locking function.

● Designed an emergency brake button for the truck.

● Rear loading compaction system trough two plates, conveyor and compactor, driven by 2 internal hydraulic cylinders with chrome rods on each plate.

● Manual and remote(optional) double control system.

PARAMETERS



Compactor Truck Model

CSC5070ZYS3


Compactor Type

Rear Compactor


Capacity

6 m3


Rear Hopper Capacity

1 m3


Compression Cycle Time

24sec


Discharge Time



Hopper Opening

63.5o


Container Opening

45o


Average Compression

450/550kg/m3


Tare Weight

2980 Kg


MEASURES(approximately)



Body Length

4884mm


Garbage Container Length

3664mm


Container Width

1949mm


Tailgate Width

1890mm


Tailgate Height

2133mm


Wheelbase

3100mm-3360mm


Sub-frame Width

100mm


Sub-frame Sectional Height

160mm


Sub-frame Thickness

10mm


U-bolt

16*400/18-400-460


CONTAINER BOX MATERIAL / model & thickness



Floor of the container

Q235/5mm


Rear Ramp /Skirt

Q235/5mm


Tailgate Cover Skirt

Q235/4mm


Sider –Rear

Q235/4mm


Sider –Front

Q235/4mm


Ceiling

Q235/4mm


Ejector Shied Rail

Q235/Profile /8mm


Chassis Sub-frame

“U” shape full length 8mm


Side Bar

Carbon steel profile


HOPPER SYSTEM



Rear Cover Type

round


Hopper

Q235/5mm


Bottom Side

Q235/5mm


Upper Side

Q235/5mm


Conveyor Plate Rail

Q345/6mm


Conveyor Plate

Q235/5mm


Plate Compactor

Q235/5mm


Joint Pins

42CrMo


Compactor Plate Shoes

Coated with HUMW


Locking Cover

Manual screw


Gasket

Anti corruption material


Sewage Tank

200Liters


HYDRAULIC SYSTEM



Engine Acceleration System

Pressure switch


Front Hydraulic Control

Through valve


Rear Hydraulic

90*45*610mm/16Mpa


Hydraulic Pump

Gear pump


Sequence Valves

Operate lifting device manual


Conveyor Cylinders

80*35*219mm/16Mpa


Compactor Cylinders

75*45*406mm/16Mpa


Telescopic Cylinders

115*100*2540mm/16Mpa


Rear Hopper Cylinders

70*40*610mm/16Mpa


Hydraulic Hose

High pressure 3000psi7


Hydro Oil Tank

120Liters


Filters

By grade


Hydro Pressure Pipes

Seamless steel


ELECTRICAL SYSTEM



Rear Lights

LED Chassis Original


Top Rear Lamps

LED plastic


Bottom Rear Lights

Chassis Original, LED


Alarm

Optional


PAINTING



Pre-dealing

Polishing oil cleaning


Primer

Anti corruption painting


Finishing

PU ,paint twice


ACCESSORIES



Mudguards

Rubber 450*30mm


PTO

QY750


STEEL GRADE(CHN)

Q235

Q345

45#

YS(Yield Strength) .Mpa

≥235,

≥345

≥590

TS(Tensile Strength) .MPa

375-476

490-675

≥785

ELO(Elongation)

≥26%

≥21%

≥12%

STRUCTURES

image

1.       TRUCK CHASSIS

2.       GARBAGE CONTAINER( BOX)

3.       EJECTOR

4.       HOPPER

5.       LIFTING SYSTEM

6.       COMPACTING

7.       SHOVEL

8.       BIN LIFTER

9.       HYDRAULIC SYSTEM

GARBAGE CONTAINER(BOX)

image

● Garbage container work piece to be processed with plasma cutting machine from high strength steel and fabricated by submerged-arc welding machine. Container bottom floor shaped with concave plane, side and top wall designed with elliptical format.

● Container featured with nice appearance, light weight, even stress. The garbage inside the container is completely closed when compaction and transportation.

BIN LIFTER

image

● Multi operation and choice.

● The bin lifter could operate with plastic single or double bin of 02 wheels’ capacity of 240l and also operate with 04wheels 1100l bins.

● Rear truck and middle of truck both designed a control panel easy operation.

COLLECTING & COMPACTING


image

● Compactor consisted with ejector panel scrapper etc.

● By means of ejectors’ up-down move and scrapper’s revolve push the garbage from hopper into garbage containers.

● Combined movement parts which fabricated from high quality beam slab or built as a box-structure, very solid construction, light duty.

COMPACTOR HYDRAULIC

image● The compactor lifting mechanism designed two double acting safety circuit hydraulic cylinders.

● Set a one way balance valve which cut-off the direct connection between lift cylinder and hydraulic pipe in the lifting cylinder, even if the hose burst, the uplifted tailgate will not drop suddenly case accident, safety props.

CONTROLS


image

1.Oil Tank                                        2.FIlters

3.PTO                                               4.Oil Pump

5.Manual Valve                              6.Discharge Cylinders

7.Pressure Gauge                          8.Tailgate Cylinder

9.Combined Valve                       10.Oil Hose

11.Slide Cylinder                         12.Ejector Cylinder

13.Shovel Cylinder

CRITICAL PARTS

Ejector

Tailgate

Conveyor Plat

Shovel System

image image image image

APPLICATION

Bin Unloading Rear Dustpan Works Skip Load Container
image image image
Scrapping Garbage Ejecter Discharge Works Tailgate Unloading Work
image image image

FABRICATING IN WORKSHOP

image

● Garbage container mounted works

● Install hydraulic system

● Hydraulic test

● Water leakage test

● Pre painting works

● Cylinder install works

● Shovel plate install

● Ejector install

● Tailgate install

● Safety lock test

PICK UP A CHASSIS

image

DRAWING

image

Send Inquiry