● Isuzu truck chassis, reliable performance, low maintenance.
● Isuzu engine, super powertrain.
● Top quality hydraulic components.
● Long life service time, durable use.
● High reliability and safety sanitation body.
4JB1CN/ ISUZU/ 98HP/ Euro 4
MSB/ ISUZU/ 5+1 Reverse Gear
Single cabin, with A/C
Gross Vehicle Weight
7.00-15/6+1 Spare Tire
Power assist steering
Front/ rear Axle: 2300kg/ 4400kg
This truck is designed for collection of bag, bulk or carted residential solid waste it can handles residential cans efficiently. The simple-to-operate designing ideal for single-man collection or recycling routes it reducing the manpower, allowing the operator to easily and efficiently dump body. The truck featured with its good appearance constructed with horizontal cross-section of the garbage container is the cylindrical shaped, portrait cross-section is trapezoidal frame, both sides and the top roof are curved shape. Heavy loading capacity the first separation and waste reduction of kitchen waste oil and water processed in container, equipped with large- sewage tank. The seal between garbage container and the rear door assembly is fully sealed, the special reinforced rubber strip is for reinforcement the sealing, the seal is good, non-secondary pollution.
● Refuse Collecting and Tipping Body.
√ Refuse container is made of hot rolled Q235 carbon steel.
√ Sheet of thickness 5mm for bottom, 4mm thick for side body.
√ Cylinder shaped tipping tank for easy unloading.
√ Container nominal loading capacity 5cubic meters.
√ O Ring-shape reinforcement a strong tanker.
√ High capacity cyclone with full opening rear lib drive by two cylinders.
√ Hydraulic full opening rear door assembly with 2 heavy-duty hydraulic locks.
√ Container Dimension (L*W*H) (mm) as manufacturer design.
● Side Loading Mechanism (Manipulator).
√ Operates by means of hydraulic cylinders and chains.
√ Could be adapted for many refuse containers.
√ Whole process hydraulically operated.
√ Two side loading mechanisms available.
● Hydraulic System
√ Hydraulic gear pump connected to the P.T.O.
√ Maximum pressure limits can be set according customer requirements. Nominal 22MPа settled.
√ Automatic valves system to make continuous cycle through one touch from the operator.
√ Hydraulic tank with filters lids, temperature gauge and level indicator are standard equipped.
√ 70Liters oil tank capacity equipped.
● Economic in lower purchase cost.
● Durability, Low maintenance cost.
● Simple hydraulic system, Fast operation.
● Minimum dead volume of refuse container.
● Minimum truck length (no rear loading).
● Single or double hydraulic piston ejector.
● Adaptability to climate and topography of middle east and Africa.
● Hydraulic circuit, operates on the vehicle’s PTO.