● SHACMAN Chassis
● Container 12CBM
● Medium Duty Fleets
● WEICHAI 210hp Engine
● Standard Cabin
● FAST 8 Gears Transmission
● Formed Compactor Body
● Reliable Cylinders
● Two-years Warranty
● Big Hopper Size
● Assemble part consists of airproof tank, prime device, pushing shovel, fluid drive system and electric-control system.
● Garbage is poured into the prime jaws and then compressed into the tank after crashing, and so the capacity is larger than the regular ones.
● The process makes sure the environment is not polluted, and labor’s intensity is reduced.
● Vehicle with high auto-immunization level adopt high quality controlling system, bearing function such as garbage compressing, collecting and transport, which achieve top level in China.
● Arc-shaped compressor compartment design adopted non-leakage sealing technology Multi-directionshift valve matched with high pressure tube.
● Tie-in of high pressure tubes we adopted is popular brand.
● Explosion-proof valve equipped on hydraulic lift cylinder to keep safety.
● Two operation types: automatic and manual; operation box equipped in cabin and rear of truck Garbage bin lift device has different type which can suit different garbage bin .
High-quality Mild Steel
Equipped on tailgate to prevent sudden fall during maintenance
Rated Hydraulic Pressure
1set Control push shovel push off and retraction
2sets Control re-compression lifting and down
Up & down Cylinder
2sets Control slider moving up and down
2sets Control scrape retraction and strengthen
2sets Control hopper’s open & close
Single cabin, with A/C
Gross Vehicle Weight
Power assist steering
1.Chassis , 2. Box body, 3. Discharging Mechanism, 4. Hopper 5.Lift Mechanism, 6. Compression Mechanism, 7. Flex Mechanism, 8. Charger Mechanism, 9.Hydraulic System
Nominal Volume of Body: appox 12CBM
Nominal Volume of tailgate: approx 2CBM
Smooth side wall with suitable reinforcements in left , right and top. Front frame with strong beams to support the main hydraulic cylinder(push-out-plate cylinder).Beams welded by sub-merge welding machine.
Full sub-frame with flexible mounting fixed to the truck chassis by horse bolts. Sub-frame and chassis medium with wooden plates.
● Ejection Plate
Moves on rails situated inside the body with easy replaceable polyamide shoes, with one main double acting hydraulic cylinder to move the push-out-plate.
Tailgate connected to body with top hinges. Rubber seal between tailgate and body to prevent dirty water leakage. Dirty water tank under the tailgate with discharge tap under the hopper. Structure consist of :one sledage,one shovel, hopper and hydraulic cylinder.
Carbon steel made of Q235B
Body Side 4mm
Body Floor 5mm
Hopper Bottom 5mm
Hopper Sides 5mm
● Hydraulic System:
Consisting of total 11 sets of cylinders:
One double acting telescopic cylinder for push-out plate
Two hydraulic cylinder for tailgate opening
Two hydraulic cylinder for sledge
Two hydraulic cylinder for pushing the shovel
Two hydraulic cylinder for turning angle for shovel
Two hydraulic cylinder for lifting the back tilt able bins(container)
Oil tanker of 110liters garbage truck, oil tanker with unction/return filters and level indicator.
Safety valves on tailgate to prevent sudden fall of tailgate during maintenance and discharging of refuse.
● Control System:
Manual, with levers