info@csctrucks.com +86 136 4729 8000
Bad Habit to Operate Bucket Truck

Bad Habit to Operate Bucket Truck

Oct 29, 2019

Damage bucket truck parts are often due to the unusual driving caused by improper bucket truck driver habit, driving can effectively extend the life of the bucket truck.

 

ACCORDING TO BUCKET TRUCK SPEED SHIFT POSITION

A lot of bucket truck driver choose the easy way, not timely replacement of bucket truck shift , even if the bucket truck does not match because the stall and speed appear to tremble is also true, so that damage to the engine is very large, and fuel consumption will increase, the best way is based on road conditions and bucket truck speed.

 

THE IRRATIONAL USE OF THE BUCKET TRUCK CLUTCH

Some new bucket truck driver when driving the bucket truck, because bucket truck are not familiar with other reasons, keeping feet long on the top of the clutch pedal, the clutch this time in a semi-linkage state, the damage to the clutch is very large, should be avoided. In addition, the start time should be careful not to use excessive throttle, the clutch should not lift put, try to make a smooth start.

 

STEERING WHEEL ROTATION ANGLE IS TOO LARGE

The direction of the booster pump is one of the most frequently used components in the bucket truck, unreasonable use is likely to result in premature bucket truck booster pump damage. In the direction , the best back in the direction is killed and then pull that it can effectively extend the service life of the direction of the booster pump.

 

STEPPING ON THE BRAKE AND HOLDING

Downhill when stepping on the brake and hold the bucket truck driver most likely to commit errors, this can easily lead to the overheating of the brake pads, bucket truck brake situation. To control the speed in normal bucket truck driving, avoid unnecessary braking, downhill to make full use of engine braking force control speed, should preferably be pumping the brake, to prevent loss of control.

 

THE FREQUENT USING OF COMBINATION SWITCH WHEN OVERTAKING

many bucket truck drivers like to stop the conversion is far beam to alert the super vehicle, an instant convert in the combination switch, adopted by the current than the normal use of light to a large, making it easy to line fault.

 

DRIVING HAND ON THE SHIFT POLES

Since most domestic bucket truck no handrails, and many bucket truck holders in the aerial truck , like the hand on the top of the lever. Not only will affect traffic safety, and long-term force exerted by the lever reached the gearbox on the various parts, gearbox damage.

 

DRIVING IN NEUTRAL GEAR

When most bucket truck drivers will be put in neutral gear as fuel-efficient means, but neglect the safety of traffic, and damage to the vehicle. For more popular in terms of the electronically controlled engine, put in neutral gear is not necessarily fuel-efficient.

 

NOT OBSERVING THE METER

A bucket truck vehicle's instrument design in place, basically all bucket truck parts work properly or not, can be read directly in the instrument, we should be observing the meter at any time in the usual traffic, once found to have abnormal signals (normal driving when the instrument lights are not displayed), you should check immediately. Normal damage of bucket truck vehicles tend to be artificially caused by improper operation, we should maintain a good driving habits in the normal bucket truck driving, so that a reasonable aerial platform truck , in order to extend the life of the bucket truck.