info@csctrucks.com +86 136 4729 8000
Mobile Fuel Oil Dispenser Failure analysis and Solutions

Mobile Fuel Oil Dispenser Failure analysis and Solutions

Nov 12, 2019

PC mobile fuel oil gun failure analysis and solutions

Symptom: mandrel at the oil spill

(1)   Failure: no compression O-ring gland; exclusion method: slightly tighten the brass nut mandrel (1)

(2)   Failure: 9 x 1.9 O-ring excessive wear; Remedy: exchange O-ring (2)

Symptom: gun with a muzzle out of port oil spill

(1) Failure: paving the main valve is debris (such as hose fittings when installing scraping, tape, etc.); exclusion method: split the nut (6) Remove the main valve (4), clear the debris.

(2) Failure: return valve paving the culvert; exclusion method: rotating the screw (13), pull out the nozzle to remove debris.

(3) failure reasons: the main valve gasket damaged; exclusion method: open the nut (6) Remove the main valve (4) Replacement seals (5)

Symptom: low-grade fuel is not self-appointed position

(1) Failure: a pipe O-ring damage; exclusion method: rotating the screw (13), pull out the nozzle, replace the O-ring (10,11)

(2) Failure: tanker pressure is too low; Remedy: increase the pressure on tanker pump

Symptom: totally self-proclaimed

(1) Failure: Long-term or placed in moist place without causing rust ball;

Remedy: open the black cover (8) Replacement of steel ball (7)

(2) Failure: Due to uninstall the tubing so that O-ring complete rupture; Remedy: Replace the O-ring (10,11)

Symptom: self-proclaimed allergies, high-grade fuel will not work

(1) Failure: tanker working too; Remedy: reduce the pressure on tanker pump

(2) Failure: barrel compensation pores blocked by debris; exclusion method: force fierce blow to debris discharge port

Symptom: to shoot, but not oil

(1) Failure: dispenser is not full of oil, the tanker hose with air; Remedy: Remove the oil gun to the first oil tanker, and then install the oil gun

(2) Failure: 9 × 1.9O-ring excessive wear; Remedy: exchange O-ring (2)

Symptom: gear slipping

Failure: wear of the top file off slip; exclusion method: file with the board file in the top piece (12) contact to be rough on the file

 

Symptom: After the handle does not reset or self-proclaimed heavy fire

(1) Failure: Push rod nut screw tight; Remedy: instincts to subside somewhat brass nuts (1) to reduce friction

(2) Failure: mandrel drying; Remedy: Push rod (3) filling oil.