FEATURES
Tipping Tank:
● Sludge Tank (Thickness 5mm steel ) Volume: 1000 lt. Water Tanker(Thickness 5mm steel ) 2000L
● Combination wash /Hydro Vac system
● WEILONG Vacuum pump, TONGJIE Plunger Pump (16Mpa, 160L/min)
● 60M pressure hose, 19mm diameter, Reel speed at 0-25m/min
● Water flushing width 2.5m-3.5m, pressure 9Mpa, 160L/min, Cleaning width > 16m , Water Gun Range >38m.
● Sludge Tanker rear tipping
● High capacity cyclone with full opening lid.
● 2” quick acting brass drain valve (heated) mounted on front head.
● 2-4” air open/spring close valve. Camlock fitings.1-6” discharge valve.
● Hydraulic full opening rear door assembly with 6 heavy-duty wing clamps.
● Double acting hydraulic cylinder.
● 4” pipe overturn protection and gussets.
● 1-6” exhaust and 1-6” intake
● Full length hydraulic dump subframe
● Hydraulic reservoir, hydraulic oil filter and sight glass.
● Spool valve control of rear door, hoist and vibrator. Separate controls for wash pump(inside cabinet).
● Hydraulic vibrator assembly on the bottom of the tank.
● Full length steel checker plate fenders,
● Tubular handrails, numbered placards, static ground cable ,toolbox complete with rain lip.
● 6” or 8” suction boom assembly with 4’ extension-hydraulic powered functions and extension.
● Electronic /Hydraulic pendant controls with 25’ of cable. Boom fully extends to 16’ .
● 10pcs of different size Nozzles
● Color as customer specifications.
● Many more options available on request.
SPECIFICATIONS
GENERAL INFORMATION | |
Chassis Model/Make | EQ1070SJ3BDF/Dongfeng |
Chassis Type | Vacuum Truck Chassis |
Drive Mode | 4×2 Right Hand Drive |
Wheelbase | 3308mm |
Vehicle length | 6.2 m |
Vehicle width | 2.05 m |
Vehicle height | 2.65m |
Tare Weight | 4.93Ton |
Recommended Loading | 2.3 Ton |
Gross Vehicle Weight | 7 .36Ton |
Max Driving Speed | 99KM/h |
TANK | |
Tank Capacity | 3 CBM |
Tank Length | 3.2m |
Tank Diameter | 1.2m |
Tank Material | Carbon Steel |
Tank Material Thick | 5mm |
Water Tank Volume | 2000Liters |
Sludge Tank Volume | 1000Liters |
Flow Capacity | 9.5 m3 /h |
Suction Depth | >8m |
Tank Tipping Angle | 45º |
Suction Time | <5 min |
Discharge Time | <5 min |
Water Washing Capacity | 500-800L/min |
Water Gun Range | 38m |
Water Flushing Width | 2.5m-3.5m |
Cleaning Width | > 16m |
PLUNGER PUMP | |
Make | Chinese TONGJIE |
Model | 3D5E |
Pressure | 16-19Mpa |
Flow Capacity | 158L/min |
Spray Flow | 120L/min |
Grease Capacity | 5L |
VACUUM PUMP | WEILONG™ PTO Driven Vacuum Pump |
Vacuum Rate | 80% |
Pressure | 7000Pa 93% |
Pump Capacity | 335L/min |
Speed | 800rpm |
Power | 5kw |
ACCESSORIES | |
Hose Reel | 1 pcs , Reel speed at 0-25m/min |
Suction Hose | 2pcs ×8 m×125mm diameter |
Pressure Water Hose | 1pcs × 60m ×19mm diameter |
Nozzles | Multiple 10pcs different size |
Hose Trays | 1pcs each tank side |
Access Ladder | Steel fabricated side mounted |
Mud Guard | Polyethylene |
Drain Valve | DN50 quick acting brass drain valve |
Release Valve | Automatic release valve to avoid the excess of pressure limit |
Open / Spring Close Valve | DN100 spring close valve, aluminum camlock fittings |
Exhaust / Intake Valve | DN100 aluminum ball valve |
Hydraulic Cylinders | Double acting |
Site Glass | Oil filter and sight glass |
Fenders | Full length steel checker plate fenders |
Tubular Handrails | Steel tube fabricated handrails |
Toolbox | Toolbox complete with rain lip |
Electric / Hydraulic Controls | Electronic and hydraulic pendant controls with cable |
ENGINE | |
Make | Dongfeng Chaoyang Diesel |
Model | CY4BK551 |
Series | 4BK |
Cylinders | 4 Nos. |
Fuel Type | Diesel |
Cylinder Lineup | Vertical in line |
Displacement | 3.707L |
Emission Standard | Euro 5 |
Max Output in kw | 75 |
Max Output in ps | 102 |
Max Torque | 280N·m |
Max Torque at rpm | 1000-2400 |
Output at rpm | 3000 |
Engine Type | Vertical in-line, four stroke, turbocharged inter-cooling, CRDI, SCR |
CABIN | REALING |
Cab Type | flat floor all steel constructed |
Cab Width | 1880mm |
Passengers Allowed | 3 Nos |
Seats and Sleeper Line | Front driver / co-driver seats |
TRANSIMISSION | |
Make | WANLIYANG |
Model | WLY5 |
Type | Manual |
Forward | 5Nos. |
Reverse | 1 Nos. |
Casting Material | Steel |
TIRES, BRAKES,OIL TANKS | |
Tire Size | 8.25-16 |
Tire Nos | 6 |
Brake Type | Air-brake |
AXLE, SUSPENSIONS | |
Front Axle Loading | 1500KG |
Rear Axle Model | 4.5T |
Rear Axle Loading | 4500kg |
Leaf Spring Nos | 8/10+7 |
ABS | Equipped |
Multipurpose Jetting and Suction Vehicle
1CBM Sludge +2CBM Water
BRIEF
The vehicle mounted combined unit for jetting/suction could create vacuum required for siphoning of mud, slurry, grit and other materials from sanitary, storm and combined sewerage system and high velocity jetting to remove and dislodge obstructions, soluble grease, grit and other materials from sanitary storm and combined sewerage system. The unit especially being required to clean out the non-man entry drain and deep wet wells of sewage pumping stations.
The unit is multi-purpose vehicle designed to collect sludge & sewage from catch-pits. It shall also be used for flushing the silted storm water drain lines.
The vehicle mounted combined unit having suction lift of at least 8 m. The unit consist of:
●Drive System, mounted on Dongfeng REALING 4×2 Right Hand Drive Truck Chassis
●Tank, Rigid Pressurized Cylindrical Tank Shaped, Rear Lids Openable
●High Pressure Jetting Pump(Plunger Pump) 160L/min capacity
●High Capacity Vacuum Pump (Exhauster/Compressor)
●Suction Hose, 16 m in length Different Sized 2”,2.5”3”Suction Hose Connected
●Hose Reel Drum, rear open lids mounted
●Sewer Hose 60m in length diameter 19mm rubber pressured water jetting hose
●Lateral cleaning system (Including handgun arrangement)
●Hydraulic System, Tank tipping & rear lids hydraulic cylinder operation
●Piping
●Control Panel,
●Accessories
●Vehicle chassis with cabin & PTO
ORDER YOUR TANKS FROM CSCTRUCK
● SUPER SV PLANT: We are market leader in the production of fuel tank in China.
● PRODUCTIVITY: 670,000Sqm facility, 1,500 workers, 28 assembly line ,yearly output 20000 units special trucks and 10000 sets of construction ensure your bulk delivery.
● EURO TECHNOLOGY: Applied 150 pcs of Patents. Advanced engineering made our tank trucks well reputation.
● CERTIFICATED MATERIALS: High quality tanks in SS, aluminum or steel with durability.
● QUALITY CONTROL:GB/T19001-2008, ISO9001:2008 Quality Management System Standard certificated.
● CUSTOMIZED: We can make whatever specialized feature you need for your next tanker.
● VARIETIES: We are engaged in providing rich choice in options for your fleet.
● RELIABILITY: Effective performance and also low maintenance.
● PROFESSIONAL: Our experienced engineering team, will support you in finding the best logistical solution.