CSCTRUCK Rotator Tow Truck series is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling bigger wrecks safer and faster. This rotator can turn in a continuous motion due to its hydraulic octopus.
As with all our Tow Trucks, customization is the order of the day and we'll build your wrecker the way you want it. Don't hesitate to inquire, standard and customized wreckers are surprisingly inexpensive. As with all of our larger units, we will customize this rotator to your specific truck - just let us know how many axles, their spread, tandem steer or not, and we'll mock up a design to meet your needs.
*Two 66,000lbs winches
*Three stage boom
*Independent 100,000 lbs under lift
*4 sets of frame forks *Dual manual controls
*Complete wireless controls (English Lanuguage is optional)
*Hydraulic proportioning valves
*Tail board wire controls
*Four stage boom
*Front and rear four stage hydraulic out-riggers
*Aluminum or stainless steel dress-uppackage
*Custom body configurations
*Custom wheel base configurations
*Custom tool box configurations
|Underlift-Max Lifting ,kg||16000|
|Underlift-Max lifting full extend,kg||7310|
|Underlift Lifting Height||1460-2950|
|Under Lift stroke,mm||1850|
|Tiltle Angle,°||-7 - +7|
|Boom-Lifting at all extend,kg||9000|
|Length of 1st Boom ,mm||5200|
|Total length of Booms,mm||8470|
|Height of Lifing,mm||12000|
|Length of Cable,mm||￠18|
|Front Legs Span,mm||5490|
|Front to Rear Distance,mm||8265|
|Type||Vertical ,in line, Water-cooled,four-stroke cycle diesel engine|
|Max Output Power, kw/rpm||213 / 2200|
|Emission Standard||Euro 3|
|Speed No.s||9 Forward and 1 Reverse Speed|
|Max Output Torque,N.m||1350|
|Max Output Speed,rpm||2600|
|Type||Single-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance|
|Front Axle||Mercedes Benz Technology|
|Front Axle Capacity,kg||6500|
|Front Axle Type||Double-shoe pneumatic brake ,driving steering axle|
|Middle&Rear Axle||Mercedes Benz Technology|
|Middle&Rear Axle Capacity,kg||6500/18000|
|Middle&Rear Axle Type||Double-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle|
|Rear Axle Ratio||5.921|
|Service brake||Brake gap can be adjusted automatically, double circulation air brake system|
|Assistant brake||Engine exhaust brake|
|Park brake||Potential springs pressing on middle and rear wheels|
|Drive Side||Left hand drive|
|Steering Type||Hydraulic steering with power assistance|
|Rocker shaft swing angle,degree||1:160|
|Type||Forward control, all steel welded construction, long cab, inner A/C, one bed|
|Tire No.s||12+1 spare tire|
|Rim No.s||12+1 spare tire|
|Type||All steel dicasting|
|Fule Tank Capacity,liters||400|
TRAINING & ERECTION (if necessary):
An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.
Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations.
A) As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning.
B) Failure due to welding defect.
C) As the poor quality of manufacturing and assembly, leading to failure or leakage control.
A) Users man-made failure lead vehicle inadequate or incomplete
B) Users, maintenance, adjustment of the fault caused by improper
C) Users disassemble, repair leading to failure.
D) User-modified to increase their own accessories or damage caused by.
E) User found the problem, but did not immediately feedback, continue to use ,leading to further damage.
A) Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service.
B) Station personnel or commissioned directly designate a technical person to contract on-site service.
Procedures for handling procedures
A) All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications.
B) Who meet the "three guarantees" the scope of the repair costs borne by our company.
C) Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user.