+86 136 4729 8000

70 Ton Rotator Recovery Wrecker Body

Boom Retracted 120000lbs
Boom Extended 26000lbs
Underlift Retracted 56500lbs
Underlift Extended 17600lbs
Towing Rating 80000lbs


Like ours all other products, our tow truck is always ready for a hard day’s work, no matter how severe.Discover the four stage boom rotation towing truck, it is with surprisingly comprehensive recovery capabilities. The detailed specification are as following:

Chassis Requirement

This four stage boom sliding tow truck mounted on a VOLVO long cab chassis for this RTR70 rotator body is packed with quality features that could get maximum strength when the load is in the corner where it is so important in most circumstances.

VNX 630 makes life on the road more comfortable and productive with a spacious 61-inch mid-roof sleeper that offers room for a bed 42 inches wide, as well as plenty of space for storage and amenities.


Cabin:61" Mid-Roof Sleeper

Emission Standard: Euro 2
Seats: 2 Seats with 1 Bed

Engine: Diesel 500-600 horsepower
Transimission: Volvo I-Shift

Minimum CLA(from cab to center of rearmost axle):280"


The four stage under-lift has a towing capacity of 53,000 pounds at 61-inch reach and 17,000 pounds at 146-inch reach.


Capacity Retracted:120,000 lb
Capacity Extended: 26,000 lb
Maximum Angle:63°

Maximum Height:552”

Rotator System

The Rotator system is widely used around the world with several hundred in operation –dedicated to emergency breakdown services – on the civil market for more than 15 years.

Tri-axle Body:

The rotator body fabricated with professional and modularized, different assemblies are precision manufacturing that ensured the multi compatibilities. CSCWRECKER is the only one manufacture who applicate the cathode electrophoresis process in the wrecker structure parts, effectively protected the parts surface antiseptic properties.

Composite body 155'' wide (including fenders) 


By use of the under-lift’s extending and retracting, hoisting and dropping, loading folding action to hold up the damaged vehicle front or rear, then towing the vehicle off the accident scene. There are variety of different structure forms of under-lifts, which could lift the accident cars axles, wheels, leaf springs easy for installation & destruction.


Side Pulling anchors includes the front landing legs and the rear land legs. Low-profile outriggers give you better maneuverability by being able to bring the load over them thus reducing the overhang.Complex rescue require booms For lateral lifting, rescue and towing operations. The side puller has greatly enhanced the wrecker’s ability of anti-overturning when under the situation of the side lift operations.


Stage Numbers Three

Underlift Lifting 56,500 lbs.

Towing Rating with Forks
 Retracted 80,000 lbs

Extended 17,600 lbs. 


Hydraulic System:

The Sliding Rotator Breakdown  are fully driven by hydraulic system, functionally with lifting, loading, towing, hauling.The hydraulic oil pipe fabricated from high-pressure galvanized steel, pressure resistance, well thermal performance, attractive looks, durable use, the service life could be synchronized with the super body. Hydraulic fittings is bite type rigid connectors(Germany), has been greatly reduced the phenomenon of interface oil leakage, the service life could be synchronized with the super body too.Adopt the Italy directional control valves, and optimized the installation to ensure the control valves works at safe operation under extreme conditions.

The inner cylinder processed with boring and barreling, the cylinder inner walls more hardness, wear, bright and clean, which could full effective to protect seals.

Are all with heat treatment, hardness, thick chrome layer easy to deal with high-intensity operations. Full application of imported seal assembly from Germany, Britain and Italy Stepseal®. And it could adjust the seal assembly according to the different structure of the oil cylinders, attempt to get the cylinder in perfect working condition. The piston support ring with high temperature, wear resistance imported material meet the design needs we chose the dual support rings or large area of a single support ring structure. In process of wrecker operation, if the cylinder under a large lateral force, high standard support ring could ensure the cylinder working in a stable working situation, avoid the piston direct friction with inner piston rod and cylinder cover.

Hot Tags: 70 ton rotator recovery wrecker body, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance

Send Inquiry