info@csctrucks.com +86 136 4729 8000

70 Ton Rotator Tow Truck

•VOLVO VNX630 Truck
•420hp Diesel Engine
•3-stage Boom System
•Underlift Capacity 18T
•Boom Capacity 70T
•Boom Max Reach 15m
70 Ton Rotator Tow Truck Chassis

Special Chassis:

A One-Two Punch. Our wide selection of chassis is packed with quality features that customers have come to expect from such names as VOLVO, BENZ, SCANNIA, HOWO, SHACMAN, FAW, FOTON, DONGFENG, JAC etc. series of special chassis manufactures developed the customized special wrecker truck set up a firm foundation for the wreck trucks. 


Boom: 

Equipped with 360 rotation booms, so that could hoist the damaged car to right position from one side or one ends, that will easy for towing, and moreover could use the boom’s telescopic range change make the accident vehicle onto the pavement from the roadbed.

 



2017-03-28

70 Ton Rotator Tow Truck Boom


Mechanical Features:

The body fabricated with professional and modularized, different assemblies are precision manufacturing that ensured the multi compatibilities. 

Tilt cylinder is disposed on the inner side of sub-frame and beams for supporting, and distributing the loads, greatly extend the vehicle’s service life. Replaceable friction disc, back landing aids roller, climbing more smooth, easy maintenance and low cost. Adjustable mechanical stop block, deck locks more accurate, reliable and secure. Deck sub-frame and roll deck hinge beam make the strengthening treatment, further enhance the carrying capacity. The new bi-directional operation panel, convenient and simple operation, high reliability. Multiple binding tools simple and easy operation.



Under-lift:

By use of the under-lift’s extending and retracting, hoisting and dropping, loading folding action to hold up the damaged vehicle front or rear, then towing the vehicle off the accident scene. There are variety of different structure forms of under-lifts, which could lift the accident cars axles, wheels, leaf springs easy for installation & destruction.

70 Ton Rotator Tow Truck Underlift
70 Ton Rotator Tow Truck Lights

Light Pylon:

Independent full size C typed LED light bar, fully consider the wrecker lights disturbance the operator’s sights during loading transporting, re-customize the appropriate assembly light bar. The C typed arc design, ally with the typical metal forming technology, well integrated the alarm lights create an elegant light pylon.


Side Puller:

Side puller includes the front landing legs and the rear land legs. Complex rescue require booms For lateral lifting, rescue and towing operations. The side puller has greatly enhanced the wrecker’s ability of anti-overturning when under the situation of the side lift operations.

70 Ton Rotator Tow Truck Side Puller

  

Hydraulic System:The Rotator  are fully driven by hydraulic system, functionally with lifting, loading, towing, hauling.

Hydraulic Circuit: The hydraulic oil pipe fabricated from high-pressure galvanized steel, pressure resistance, well thermal performance, attractive looks, durable use, the service life could be synchronized with the super body. 

Hydraulic fittings is bite type rigid connectors(Germany), has been greatly reduced the phenomenon of interface oil leakage, the service life could be synchronized with the super body too.

Circuit Change Valves:

Adopt the Italy directional control valves, and optimized the installation to ensure the control valves works at safe operation under extreme conditions.



Oil Cylinder:

The inner cylinder processed with boring and barreling, the cylinder inner walls more hardness, wear, bright and clean, which could full effective to protect seals.

Piston Rod (solid body):

Are all with heat treatment, hardness, thick chrome layer easy to deal with high-intensity operations. Full application of imported seal assembly from Germany, Britain and Italy Stepseal®. And it could adjust the seal assembly according to the different structure of the oil cylinders, attempt to get the cylinder in perfect working condition. The piston support ring with high temperature, wear resistance imported material meet the design needs we chose the dual support rings or large area of a single support ring structure. In process of wrecker operation, if the cylinder under a large lateral force, high standard support ring could ensure the cylinder working in a stable working situation, avoid the piston direct friction with inner piston rod and cylinder cover.

 

  

Customization:

Special operating environment requires the special customized wrecker solution. In line with the needs of the market, we provide reasonable personalized conversion program, strengthen its functions based on the original roll back carriers. The customization solution current optional with, deck fence system, detachable ceiling system, deck reserved more special holes for bundles, removable rails, wheel lift receivers for single / double tires, front push bumper and customization designing is available.

Working Images:

 


Description

Brief

Additional Forks Breakdown Rotator boasts an empowering combination of heavy-duty capabilities, superior stabilizing technology, commanding rotation, unsurpassed pulling capacity and unstoppable power. And now it’s available with the more impressive rotator Body Series. The 70 Ton Rotator Tow Truck designed for heavy duty,reaches the perfect balance between size and capacity. With the 360° continuous motion and the sliding option this unit can reach and lift in any situation you will encounter.


Features

VNX 630 makes life on the road more comfortable and productive with a spacious 61-inch mid-roof sleeper that offers room for a bed 42 inches wide, as well as plenty of space for storage and amenities

Cabin:61" Mid-Roof Sleeper

Emission Standard: Euro 2
Seats: 2 Seats with 1 Bed

Engine: Diesel 500-600 horsepower
Transimission: Volvo I-Shift


Minimum CLA(from cab to center of rearmost axle):280"

Capacity Retracted:120,000 lb
Capacity Extended: 26,000 lb
Extension:331”
Rotation:360°
Maximum Angle:63°

Maximum Height:552”

Underlift Lifting 56,500 lbs.

Towing Rating with Forks
 Retracted 80,000 lbs

Extended 17,600 lbs. 

70 Ton Rotator Body

Underlift-Max Lifting at all extended,kg12500
Underlift-Max lifting,kg17,000
Original Lifting Mass,kg30000
Underlift Lifting Length ,mm1675-3314
Underlift Stroke,mm1639
Tiltle Angle,°-10
Underlift to Ground Height,mm<900
Moving Angle,°-10-93
Boom-Max Lifting,kg70000
Boom-Lifting at all extend,kg6000
Length of 1st Boom ,mm6000
Total length of Booms,mm15000
Max Height of Lifing,mm14070
Move Angle,°≦60
Rotator ,°360
Winch Qty,pcs2
Winch Capacity300kn x 2
Wire Length45m x 2
Length of Cable,mm¢26
Front Legs Span,mm7780
RearLegs Span,mm4625
Front to Rear Distance,mm8350

Volvo Chassis

Drive Mode8×4
N.V.W,kg32000kg
Tare Weight,kg6705
Engine420ps
TypeVertical ,in line, Water-cooled,four-stroke cycle diesel engine
Emission StandardEuro 4
Speed No.s12 Forward and 1 Reverse Speed;Manual (Mechanical)
Sterring Left hand drive 
CabinForward control, all steel welded construction, long cab, inner A/C, one bed
Tires12.00R22.5;12+1 spare tire;Radius tires
Electrical24V

70 Ton Rotator Tow Truck Chassis

Special Chassis:

A One-Two Punch. Our wide selection of chassis is packed with quality features that customers have come to expect from such names as VOLVO, BENZ, SCANNIA, HOWO, SHACMAN, FAW, FOTON, DONGFENG, JAC etc. series of special chassis manufactures developed the customized special wrecker truck set up a firm foundation for the wreck trucks. 


Boom: 

Equipped with 360 rotation booms, so that could hoist the damaged car to right position from one side or one ends, that will easy for towing, and moreover could use the boom’s telescopic range change make the accident vehicle onto the pavement from the roadbed.

 



2017-03-28

70 Ton Rotator Tow Truck Boom


Mechanical Features:

The body fabricated with professional and modularized, different assemblies are precision manufacturing that ensured the multi compatibilities. 

Tilt cylinder is disposed on the inner side of sub-frame and beams for supporting, and distributing the loads, greatly extend the vehicle’s service life. Replaceable friction disc, back landing aids roller, climbing more smooth, easy maintenance and low cost. Adjustable mechanical stop block, deck locks more accurate, reliable and secure. Deck sub-frame and roll deck hinge beam make the strengthening treatment, further enhance the carrying capacity. The new bi-directional operation panel, convenient and simple operation, high reliability. Multiple binding tools simple and easy operation.



Under-lift:

By use of the under-lift’s extending and retracting, hoisting and dropping, loading folding action to hold up the damaged vehicle front or rear, then towing the vehicle off the accident scene. There are variety of different structure forms of under-lifts, which could lift the accident cars axles, wheels, leaf springs easy for installation & destruction.

70 Ton Rotator Tow Truck Underlift
70 Ton Rotator Tow Truck Lights

Light Pylon:

Independent full size C typed LED light bar, fully consider the wrecker lights disturbance the operator’s sights during loading transporting, re-customize the appropriate assembly light bar. The C typed arc design, ally with the typical metal forming technology, well integrated the alarm lights create an elegant light pylon.


Side Puller:

Side puller includes the front landing legs and the rear land legs. Complex rescue require booms For lateral lifting, rescue and towing operations. The side puller has greatly enhanced the wrecker’s ability of anti-overturning when under the situation of the side lift operations.

70 Ton Rotator Tow Truck Side Puller

  

Hydraulic System:The Rotator  are fully driven by hydraulic system, functionally with lifting, loading, towing, hauling.

Hydraulic Circuit: The hydraulic oil pipe fabricated from high-pressure galvanized steel, pressure resistance, well thermal performance, attractive looks, durable use, the service life could be synchronized with the super body. 

Hydraulic fittings is bite type rigid connectors(Germany), has been greatly reduced the phenomenon of interface oil leakage, the service life could be synchronized with the super body too.

Circuit Change Valves:

Adopt the Italy directional control valves, and optimized the installation to ensure the control valves works at safe operation under extreme conditions.



Oil Cylinder:

The inner cylinder processed with boring and barreling, the cylinder inner walls more hardness, wear, bright and clean, which could full effective to protect seals.

Piston Rod (solid body):

Are all with heat treatment, hardness, thick chrome layer easy to deal with high-intensity operations. Full application of imported seal assembly from Germany, Britain and Italy Stepseal®. And it could adjust the seal assembly according to the different structure of the oil cylinders, attempt to get the cylinder in perfect working condition. The piston support ring with high temperature, wear resistance imported material meet the design needs we chose the dual support rings or large area of a single support ring structure. In process of wrecker operation, if the cylinder under a large lateral force, high standard support ring could ensure the cylinder working in a stable working situation, avoid the piston direct friction with inner piston rod and cylinder cover.

 

  

Customization:

Special operating environment requires the special customized wrecker solution. In line with the needs of the market, we provide reasonable personalized conversion program, strengthen its functions based on the original roll back carriers. The customization solution current optional with, deck fence system, detachable ceiling system, deck reserved more special holes for bundles, removable rails, wheel lift receivers for single / double tires, front push bumper and customization designing is available.

Working Images:

 


Send Inquiry