info@csctrucks.com +86 136 4729 8000

6 Ton Tow Truck Mounted Crane

Dongfeng 4x2 Truck
Cummins 170hp Engine
XCMG 5 Ton Crane
Underlift 3.9 Ton
Flatbed Length 6.2m
Flatbed Loading 7.2T


Flat bed system 

Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of broken car light duty trucks.



Rollback System

Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes.


Crane

1) The cross section of the new hexagonal arm body has greater lifting capacity under the same amplitude, and the cross section has strong bending and torsion resistance.

2) Adopt rack cylinder to drive rotation, the rotation is stable and powerful, which is convenient for maintenance, and the rotation angle can reach 420°.

3) The double-cavity large-span outrigger structure has better operation stability.

4) Adopt finite element to optimize the product structure design, the weight of the whole machine is lighter.

5) Equivalent torque design, stronger lifting performance.

6) Standard L-HM (CY) XCMG special wide temperature hydraulic oil can be used in winter and summer.

Chassis Truck

Dongfeng KINGRUN 4x2 truck chassis with left hand drive steering, right hand for option, Engine 170hp option for 190hp , 210hp, Day cab-steel cabin , Hardtop,60° tiltable,manual shift five gear lever transmission.

DONGFENG Rear Collecting Solid Waste Unit


Crane wrecker truck rear view 

5 tons flatbed wrecker truck mounted with crane side view                   


5 tons flatbed wrecker truck mounted with crane Front View



Training & Erection (if necessary):

An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.

 


 Warranty:

Part 1

General Description

 

:

Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations.

Part 2

“Three Guarantees”Scope

:

A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning.

B)      Failure due to welding defect.

C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control.

Part 3

Non-“Three guarantees”Scope

:

A)      Users man-made failure lead vehicle  inadequate or incomplete

B)      Users, maintenance, adjustment of the fault caused by improper

C)      Users disassemble, repair leading to failure.

D)     User-modified to increase their own accessories or damage caused by.

E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage.

Part 4

Service Mode

:

A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service.

B)      Station personnel or commissioned directly designate a technical person tocontract on-site service.

Part 5

Procedures for handling procedures

:

A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications.

B)      Who meet the "three guarantees" the scope of the repair costs borne by our company.

C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user. 


Description

Brief:

CSCTRUCK as a professional manufacturer of all kinds of wrecker truck, we have designed various kinds of wrecker towing trucks. Right hand tow truck, left hand drive tow truck, flatbed tow truck,  tow truck wrecker mounted crane, under lift wrecker truck, rotator tow tuck, etc. The towing weight is from 2ton to 50tons, flat bed wrecker mounted with crane is suitable for carrying all passenger vehicles, medium duty trucks and medium duty equipment. 

Applications:

The crane wrecker  is a vehicle used to transport broken motor vehicles to another location (generally a repair garage), or to recover vehicles which are no longer on a drivable surface.Towing services are generally provided by an emergency road service operator. Vehicles are often towed in the case of breakdowns or collisions, or may be impounded for legal reasons.


The wrecker towing truck with crane is platform tow tuck mounted with crane. It is a real multifunctional wrecker truck. It can be both used to transport the broken car which can move by flatbed and lift the broken car whose engine can't start by crane. The crane can rotate 360 degree and the lifting weight is from 3 ton to 8 ton.

Wrecker

Underlift-Max lifting

:

3900 kg

Underlift-Max Lifting

:

2750 kg at all extend

Underlift Extend Length

:

2700 mm

Length of Flatbed

:

6200 mm

Width of Flatbed

:

2350 mm

Flatbed Carry Weight

:

7200 kg

Flatbed Title Out

:

2700 mm

Min. Title Angle

:

12 degree

Heigth from Ground to Flatbed

:

1230 mm

Winch Qty

:

1 pcs

Winch Type

:

Hydraulic

Diameter of Winch

:

¢110 mm

Cable Loading Rate

:

40 KN

Cable Length

:

21~28 m

Cable Diameter,

:

¢11 mm

Min. Ground Clearance

:

≥215 mm

Max. Gradeability

:

28%

Crane


SQ5SK2Q

Max Lifting Capacity

:

5000 kg at 2.5m 

Max Lifting Height: 10.7m
Max. Horiziton Reach:8.5m

Max Lifting Moment

:

12.5 t.m

Recommend Power

:

18 kw

Max Oil Flow of Hydraulic Sys.

:

32 l/min

Oil Tank Capacity

:

90 liters

Crane Weight

:

2120 kg

Installation Space

:

900 mm

Rotation Angle

:

360 degree all rotation

MEASUREMENT



Wheelbase

:

4700 mm

Length

:

7550 mm

Width

:

2500 mm

Height

:

2900 mm

Front Overhang

:

1430 mm

Rear Overhang

:

1420 mm

WEIGHT



Gross Vehicle Weight(G.V.W)

:

12495 kg

Vehicle(Curb) Weight

:

8000 kg


CHASSIS 

ENGINE



Model

:

B170 33 (DONGFENG CUMMINS)

Type

:

Vertical ,in line Water-cooled,intercooling turb chargeing system, four-stroke cycle diesel engine

Fuel Injection

:

Direct injection.

Horsepower

:

170hp(125kw)@2500rpm

Torque

:

560(N.m)/ 1300 (rpm)

Displacement

:

5.9L / 4 cylinders

Emission Standard

:

Euro 3

Fuel Tank Capacity

:

150liters

CAB& ACCESSORIES



Structurer

:

Day cab-steel cabin , Hardtop,60° tiltable

Cabin

:

3 seats, with seat belts

Instrumentation

:

i.Fuel gauge, oil level gauge, oil pressure gauge, speed tachometer

ii.Engine Coolant temperature gauge

iii.Battery charging indicator

iv.Parking brake light ,Reversing alarm

v.Filters and fuel-water separator service indicators

vi.Speedometer and Odometer

vii. A/C,CD,Radio ; Cigar Lighter

CLUTCH



Type

:

Push type, dry single plate; hydraulic actuation

Disc

:

Φ395mm

TRANSMISSION



Gearbox Model

:

DF6S750(7.455)

Type


Floor-mounted, manual shift gear lever

Torque of Gearbox

:

430 N.m

Speed

:

6+1

Max. Geared Speed

:

110km/h

Power Take Off

:

Manufacturer's standard PTO box is provided

Wheel Drive

:

Rear two wheels drive with 4×2 wheel formula

CHASSIS FRAME



Structuer

:

Electrophoresis ; double all steel constructed frame to be reinforced with cross members.

Frame Sectional Modulus

:

250×80×(7+4) mm

STEERING BOX



Type

:

Hydraulic power assistance steering

Drive Mode

:

Left hand steering control

SUSPENSION



Front

:

Double acting telescopic shock absorbers ,8pcs spring

Rear

:

Second stage helper spring,6+5 pcs

AXLES



Rear Axle Rating

:

6,650kg; Hub reduction floating rear axle

Front Axle Rating

:

3,350kg; Rigid I beam

BRAKES



Parking

:

Mechanical release parking brakes

Engine

:

Foot-operated engine brake

Service

:

Power assisted hydraulic actuation service brakes all four wheels

WHEELS



Quantity

:

6+1spare

Tire Size

:

9.00-20, (ALL WHEELS)

Ply Rating

:

14PR



Flat bed system 

Crane wrecker with flipper tail and 19' 6" deck (9 degree load angle). This flat bed is suitable for carrying all passenger vehicles, light duty trucks and light duty equipment. In tough times, the crane wrecker is every owner or fleet operator's best friend. That mounted with XCMG 5ton crane suitable for carry all kinds of broken car light duty trucks.



Rollback System

Not only can you transport severely damaged vehicles, but you also have the capacity to grab another car on the ride to your lot using the independent wheel lift with swivel scoop pans. If calls are few and far between ,you can always transport light duty equipment or just about anything else . To help you keep organized, we include a single 36" under mount tool box, but optionally we offer many types of storage up to dual 72" tool boxes.


Crane

1) The cross section of the new hexagonal arm body has greater lifting capacity under the same amplitude, and the cross section has strong bending and torsion resistance.

2) Adopt rack cylinder to drive rotation, the rotation is stable and powerful, which is convenient for maintenance, and the rotation angle can reach 420°.

3) The double-cavity large-span outrigger structure has better operation stability.

4) Adopt finite element to optimize the product structure design, the weight of the whole machine is lighter.

5) Equivalent torque design, stronger lifting performance.

6) Standard L-HM (CY) XCMG special wide temperature hydraulic oil can be used in winter and summer.

Chassis Truck

Dongfeng KINGRUN 4x2 truck chassis with left hand drive steering, right hand for option, Engine 170hp option for 190hp , 210hp, Day cab-steel cabin , Hardtop,60° tiltable,manual shift five gear lever transmission.

DONGFENG Rear Collecting Solid Waste Unit


Crane wrecker truck rear view 

5 tons flatbed wrecker truck mounted with crane side view                   


5 tons flatbed wrecker truck mounted with crane Front View



Training & Erection (if necessary):

An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.

 


 Warranty:

Part 1

General Description

 

:

Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations.

Part 2

“Three Guarantees”Scope

:

A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning.

B)      Failure due to welding defect.

C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control.

Part 3

Non-“Three guarantees”Scope

:

A)      Users man-made failure lead vehicle  inadequate or incomplete

B)      Users, maintenance, adjustment of the fault caused by improper

C)      Users disassemble, repair leading to failure.

D)     User-modified to increase their own accessories or damage caused by.

E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage.

Part 4

Service Mode

:

A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service.

B)      Station personnel or commissioned directly designate a technical person tocontract on-site service.

Part 5

Procedures for handling procedures

:

A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number,model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications.

B)      Who meet the "three guarantees" the scope of the repair costs borne by our company.

C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user. 


Send Inquiry