info@csctrucks.com +86 136 4729 8000

Small Wrecker Tow Truck

●Dongfeng Dollicar Truck
●120hp Diesel Engine
●Boom Lifting 2628kg
●Max Towing 3000kg
●Size 5.52×2.27×2.59m


Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .

Lift Rating at Full Extension  3800 kg  on Forks,

Center line of Forks Fully Extended Worm Gear,

Fully Retracted Capacity 5900 kg ,

Center line of Forks Free Wheel,

Fully Retracted Manual Tensioner. 



Single stage boom and wheel lift with swivel scoop pans



             


Single 8,000 lbs worm gear winch 









Two units main lifting cyliders

  

                                         



50 feet of 3/8 wire rope

Manual spring tensioner 

Two sets of frame forks 

Frame fork adapters 

Dual manual controls 

Weather stripping on all tool box doors 

Light pylon




Front 45 angle view ,light duty design for carry passenger cars.                         

Side view for the light duty integrated wrecker truck   



Training & Erection (if necessary):

An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.


 Warranty:


General Description

 

:

Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations.


“Three Guarantees”Scope

:

A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning.

B)      Failure due to welding defect.

C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control.


Non-“Three guarantees”Scope

:

A)      Users man-made failure lead vehicle  inadequate or incomplete

B)      Users, maintenance, adjustment of the fault caused by improper

C)      Users disassemble, repair leading to failure.

D)     User-modified to increase their own accessories or damage caused by.

E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage.


Service Mode

:

A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service.

B)      Station personnel or commissioned directly designate a technical person to contract on-site service.


Procedures for handling procedures

:

A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications.

B)      Who meet the "three guarantees" the scope of the repair costs borne by our company.

C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user. 


Description

Brief:

INT Light duty Tow Truck Wrecker with steel or aluminum deck, single or two stage boom, single or twin line winches. INT  is the front-line economy wrecker, suitable for towing all passenger vehicles and light duty trucks. This unit will quickly become one of your favorite wreckers for its ease of use and versatility. Our unique design shifts more weight to the front axles which gives you better grip when towing on snowy or wet days. Our INT is over-built to ensure durability and long-life; this will protect your investment and keep you on the road longer and hauling more vehicles faster. Owners and fleet operators alike will quickly discover that this light duty wrecker is the best value that's available on the market today. 


Performance:

Lift Rating at Full Extension  2800 kg  on Forks, 

Center line of Forks Fully Extended Worm Gear, 

Fully Retracted Capacity 3000 kg , 

Center line of Forks Free Wheel, 

Fully Retracted Manual Tensioner. 


Features:

*Steel body with checkered plate deck 

*Single stage boom and wheel lift with swivel scoop pans

*Single 3000kg worm gear winch 

* Two units main lifting cylinders

*50 feet of 3/8 wire rope

*Manual spring tensioner 

*Two sets of frame forks 

*Frame fork adapters 

*Dual manual controls 

*Weather stripping on all tool box doors 

*Light pylon

Options:

*Single door24" or double door 48" tunnel tool box(es)

*Twin line wiches 

*Cab-over tunnel tool box 

*Custom paint and graphics

*Aluminum dress up kit

*Wired controls 

*Complete wireless controls 

*In-cab controls 

*Aluminum body

*84" CA custom body

*Full installation services 

*Additional frame forks 

*Custom attachments 

*Extended warranty 

Wrecker Body:

Boom Rating on first stage,kg2,628
Boom Elevation maximum,degrees 24
Winch worm gear, optional Twin Line,kg3000
Wheel Lift Rating @ Full Extension,kg1815
Tow Rating,kg3000
Cross Bar Size,mm102x 89
Tilt Angles,degrees+12 ~ -11 
Reach Past Tailboard,mm1090
Maximum Reach Past Tailboard,mm1575
Wire Rope Length,m15.2
Wire Rope Dia,inch3/8

Chassis Truck:


EngineCY4102-C3C
TypeVertical ,in line, Water-cooled,four-stroke cycle diesel engine
Max Output Power, kw(hp)/rpm88(120)/ 2200
Max Torque,N.m/rpm280
Displacement,ml3856
Emission StandardEuro 3
Transmission
Speed No.s5 Forward and 1 Reverse Speed
Max Output Torque,N.m568
GearshiftManual (Mechanical)
Clutch¢430
TypeSingle-plate dry coil-spring dry frictional clutch, hydraulically operating with air assistance 
AxleDENA
Front Axle Capacity,kg3200
Front Axle TypeDouble-shoe pneumatic brake ,driving steering axle
Middle&Rear Axle Capacity,kg4290
Middle&Rear Axle TypeDouble-shoe pneumatic brake ductile casting casing, with hub redactor, double reduction driving axle
Frame216*70*6+3mm
Brakes
Service brakeBrake gap can be adjusted automatically, double circulation air brake system 
Assistant brakeEngine exhaust brake
Park brakePotential springs pressing on middle and rear wheels 
Sterring Integral Hydraulic Power
Drive SideLeft hand drive
Steering TypeHydraulic steering with power assistance
Cabin
TypeForward control, all steel welded construction,short cab, inner A/C,Radio,Cassette, tiltable
Seat Nos2
Bunk No.s0
Wiper No.s2
Tires8.25R20
Tire No.s6+1 spare tire
TypeRadius tires
Ply,16PR
Rims8.25R16
Rim No.s6+1 spare tire
TypeAll steel dicasting
Electrical12V
Battery Voltage,V12
Battery Ampere,Ah145
Generator,V,A28,35
Starter, Kw/24V5.4
Fule Tank Capacity,liters200


Front view for 2tons integrated wrecker ,the wrecker could be loaded with one unit 20GP container that could less a lot of shipping cost for the sea freight charges,finally lower your purchase cost for such wrecker truck .We could also design the wrecker system according to your old truck chassis that you only should offer us the correct information for your old chassis .

Lift Rating at Full Extension  3800 kg  on Forks,

Center line of Forks Fully Extended Worm Gear,

Fully Retracted Capacity 5900 kg ,

Center line of Forks Free Wheel,

Fully Retracted Manual Tensioner. 



Single stage boom and wheel lift with swivel scoop pans



             


Single 8,000 lbs worm gear winch 









Two units main lifting cyliders

  

                                         



50 feet of 3/8 wire rope

Manual spring tensioner 

Two sets of frame forks 

Frame fork adapters 

Dual manual controls 

Weather stripping on all tool box doors 

Light pylon




Front 45 angle view ,light duty design for carry passenger cars.                         

Side view for the light duty integrated wrecker truck   



Training & Erection (if necessary):

An operating and maintenance training or erection for the only wrecker system for your old chassis for the buyer personnel is provided in our factory for max 15 days till it’s believed all necessary details are shared.If it’s requested , our technical team (consisting 3 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.


 Warranty:


General Description

 

:

Our service commitment under the terms and conditions as: two years service period or less than 40,000 km running, if manufacturing quality problems occur, the company shall be the implementation of "three guarantees" service involving the chassis by the chassis manufacturer according to their regulations.


“Three Guarantees”Scope

:

A)      As the parts, assembly parts design or poor manufacturing quality, leading to vehicle failure not functioning.

B)      Failure due to welding defect.

C)      As the poor quality of manufacturing and assembly, leading to failure or leakage control.


Non-“Three guarantees”Scope

:

A)      Users man-made failure lead vehicle  inadequate or incomplete

B)      Users, maintenance, adjustment of the fault caused by improper

C)      Users disassemble, repair leading to failure.

D)     User-modified to increase their own accessories or damage caused by.

E)       User found the problem, but did not immediately feedback, continue to use ,leading to further damage.


Service Mode

:

A)      Receiving user feedback on product quality issues, based on the area, region, route conditions, to reply within 2 hours, after-sales service staff from 24 to 48 hours to the scene service.

B)      Station personnel or commissioned directly designate a technical person to contract on-site service.


Procedures for handling procedures

:

A)      All our products are in use, failure to provide needed services to our company please write and inform the failure of products serial number, model number, product certification, BL date and tell us the truthfully detailed breakdown to our Division secretary we will reply or send technical analysis deal with the applications.

B)      Who meet the "three guarantees" the scope of the repair costs borne by our company.

C)      Who is not a "three guarantees" range, we offer technical services, but all costs borne by the user. 


Send Inquiry