● Bolted type easy for installation easy for maintenance
● Three leaf spring suspension, 13000kg × 3 Nos
● Two speed 28ton lift capacity landing gear
● 29 Nos. of Reinforced closely cross members
● Heavy duty buckle on both side of the trailers
● 4 Nos of assembled floor deck fabricate with high tensile steel reinforced hot rolled style design
● Rear bumper with S700 high strength steel, prevent from car getting into the trailer
● Reliable WABCO ABS brake system, T30/30 brake chambers
● Cable carrier system for air hose and electric harness protection
13000 ×2500×1560 mm
1 Nos × 40HC/2 Nos×20GP/ 1 Nos×20GP (load centered in deck)
Saddle to Ground (loaded)
Saddle to Ground (unloaded)
5 mm, wear steel
Z style 700mm in deep,5mm thick, high tensile, hot rolled
High tensile steel floor, thick 2.5mm in edge 2 Nos, thick 2 mm in middle 2 Nos.
FUWA Brand 13T×3 Nos.
16 mm, thickness/ 9 Nos.
JOST 28Ton 2-speed
Support by a triangle shaped steel bar
12R22.5 16PR ×12 Nos.
First axle single air brake
WABOC 4 relay
FUWA 420mm×220 mm
4 Nos.× Double Chamber
2 Nos. ×Single Chamber
Socket for lighting system
Right front with 1 m toolbox
GB1589standard designed white electroplate painting
This model container flatbed trailer for 40 feet length container is designed by Schmitz Cargobull Wuhan based on its Germany factory which is the Germany top 3 semitrailer manufacture model S.GM. The features for this mode its bolting connection structure instead of the normal welding process the thermal will change the steel’s tensile or stress, but bolted will not in that will enhance the trailer’s loading capacity The complete galvanized chassis body and cross meters, side frames ensured this trailer will not be rust within 10 years.
Would you like to receive more information about the 20'-40' 12-Pin 3-Axle Chassis? Fill out the simple form below, and a representative will contact you.