info@csctrucks.com +86 136 4729 8000

Truck Mounted PALFINGER Telescoping Crane

●ISUZU FTR Model Chassis
●Japan 6HK1 240hp Engine
●PALFINGER 10T Crane
●Hydraulic Outreach 14m
●Box Length in 5m
●2-years Quality Guarantee

OVERVIEW

PALFINGER 10T Crane Mounted Truck

The 10 Ton truck mounted crane is designed to be installed on a 18 ton Isusu truck and other GVW 18-25 Ton commercial vehicles. The operator could control this truck mounted crane with high precision proportional levers in every position and doing so, can supervise the loading and unloading operations. That means a great time saving a higher safety.Optional for Safety Package available




NOTE
●Fully extend all outriggers on solid, level surface leveling vehicle.

●Rated loads shown in the chart are based on the crane strength rather than stability.

●Rated loads shown must be reduced in accordance with vehicle weight, loaded condition of truck, crane mounting position, wind, ground condition and operating speed.

●The mass of hook(50kg), slings, and any accessories attached to the boom or loadline must be deducted from the above rated loads in the chart.

●In accordance with our policy of constant product improvement, all specifications are subject to change without notice or obligations.

Crane Kits

WHY CSCTRUCK


ordering process

Description

FEATURES

● Chassis

Commercial Chassis make ISUZU FTR

Reliable Isuzu Make Engine

Turbocharged and intercooled Common rail diesel engine

Forward tilt, Sleeper cab, 3 seats, A/C

Air brake, exhausted brake, ABS optional

Single plate, air assisted hydraulic control

Power assistance steering, left hand operated, right hand drive not available

Isuzu transmission 6 speed forward 1 speed reverse manual control

Mechanism leaf spring suspension system

Front multi leaf spring double acting shock absorbers, front stabilizer bar

Rear leaf multi leaf main spring helper spring

Full air brake system, front drum brake, rear parking brake, exhaust brake

Crane

Sany Palfinger 4 section Telescopic boom Crane

High tensile strength extension booms

Optimized boom length and outreach

Best lift moment in the industry

Wide stabilizer support safe lifting

2 working lights ensure night operation

Over-load protection system

European Quality Standards

Best reliability, performance, and safety in the industry

Optimized for installation on a rear tandem axle truck

Optional for Safety Package available


SPECIFICATIONS

Dimensional Data

Overall Size

8990×2510×3550 mm

Wheelbase

5800 mm

Cab front to front axle

1,335 mm

Rear axle to truck end

1,855 mm

G.V.W

18,000 kg

Truck Weight

10,550 kg

Economical Loading

7,255 kg

Truck Chassis

Chassis Model

FTR 850

Cab Tilt

45°

Clutch

380 mm

Front Axle Rating

6,500 kg

Rear Axle Rating

11,500 kg

Maximum Speed

118 km/h

Gradeability

34.59 %

Subframe

100mm

Tires

11R22.5 6+1 spare

Powertrain

Engine Model

6HK1-TCN

Rated Horsepower @ Speed

176kw (240 hp) @ 2400 RPM

Torque @ Speed

706 N.m @ 1450 RPM

Displacement

7.79 L

Emission Standard

Euro 4

Transmission

MZW6P 1st Gear Ratio 6.615

Axle

Front F063, Rear R092 Ratio 5.875

Truck Mounted Crane

Crane Model

SPS25000

Crane Weight

3820 kg

Lifting Moment

25 T.M

Lifting Capacity

10000 kg @ 2500 extension

Boom Numbers

4

Max. Hydraulic Outreach

14 m

Boom Elevation

75°

Rotation System

360° Continuous

Stabilizer Spread

5600mm

Hydraulic System

Controls

Electric/ Hydraulic

Flow Rate

70 LPM

Operating Pressure

34 MPa

Reservoir

200 L

Cargo Box

Box Size

4950×2290×600 mm

Side Thickness

2 mm Corrugated steel

Floor Thickness

3 mm diamond plate


OVERVIEW

PALFINGER 10T Crane Mounted Truck

The 10 Ton truck mounted crane is designed to be installed on a 18 ton Isusu truck and other GVW 18-25 Ton commercial vehicles. The operator could control this truck mounted crane with high precision proportional levers in every position and doing so, can supervise the loading and unloading operations. That means a great time saving a higher safety.Optional for Safety Package available




NOTE
●Fully extend all outriggers on solid, level surface leveling vehicle.

●Rated loads shown in the chart are based on the crane strength rather than stability.

●Rated loads shown must be reduced in accordance with vehicle weight, loaded condition of truck, crane mounting position, wind, ground condition and operating speed.

●The mass of hook(50kg), slings, and any accessories attached to the boom or loadline must be deducted from the above rated loads in the chart.

●In accordance with our policy of constant product improvement, all specifications are subject to change without notice or obligations.

Crane Kits

WHY CSCTRUCK


ordering process

Send Inquiry