● Truck Chassis
√ Isuzu engine
√ Day cab-steel cabin , Hardtop, tiltable, 3 seats, with seat belts
√ Push type, dry single plate; hydraulic actuation Clutch
√ Manufacturer's standard PTO box is provided
√ Rear two wheels drive with 4×2 wheel formula
√ Light-duty all steel constructed frame to be reinforced with cross members.
√ Hydraulic power assistance steering
√ Left hand steering control
√ Hub reduction floating rear axle
● Cargo Van
√ Envelope fully metal structured frame works
√ double metal frame structure, exterior of cold rolled steel
√ Aluminum out skin panels masked
√ Fire-retardant insulation material laminated to fill in the medium.
√ Double open doors in the rear. One side open door in front.
√ Double section and insulated.
√ Front compartment for passengers, Rear for equipment’s.
√ Passengers sections with 1 side window, rear section 1 side window.
√ Three-phase, four-wire, Y type connection Wiring
√ Welding Rectifier
√ Welder’s Helmet, Plastic, max. weight -0.6kg, with head fastening
√ Flame Cutoff Equipment
√ 1 unit Workbench With Boxes
√ 2 units Remote projector with support
√ 2 units Cabinet for uniform
√ Electric Control Panel for connection of devices
√ 25m Cable extender
√ Internal & External Lights
√ Tools kit, Electric Heater, Water Tank, Water Pump
Truck Pay loading
280 N.m @1700/ r/min
2.999L/ 4 cylinders
Fuel Tank Capacity
MSB-5S/ 5M 5+1 Speed
Torque of Gearbox
230/ 260/ 280 N.m
Max. Geared Speed
Rear Axle Rating
Front Axle Rating
2,261kg; Rigid I beam
7.00 -16, (ALL WHEELS)
Diesel Engine Make
Bore × Stroke
DC24V electric starting
Rated Input Voltage
Rated Output Current
Forced air cooling
Flame Cutoff Equipment
Torch Working Pressure
Welding/ Cutting Thickness
The model is designed for implementation of emergency repairing works in public utility industries. The device provides implementation of following works: electric welding, flame cutoff, repairing and installation of ground-based equipment, repairing of water supply and sewage pipelines.
An operating and maintenance training for the buyer personnel is provided in our factory for 2 days till it’s believed all necessary details are shared. If it’s requested , our technical team (consisting 2 technician) could also travel to the buyer’s homeland in order to provide this training. In this case, all transportation and accommodation costs ( visas – plane tickets – airline fees – motorway transportation –hotel room – meals etc.) on route of “Suizhou – Buyer’s Field – Suizhou” is undertaken by the buyer. Normally, total training time doesn’t get longer than 2 days with all necessary conditions are met.
This equipment is under our warranty for any fault which caused by manufacturing, material and worker errors for 1 year after date of delivery.